-
The evolution of circular connectors has produced a multitude of
configurations which have more precise dimensional tolerances and
electrical characteristics than any other mechanical component used in
modern electrical systems. The associated tooling must meet the same level
of precision to apply the connector to its intended purpose. Until now,
very little attention has been focused on the tooling which is used to
mount strain-relief back shells and other accessories to wired connector
assemblies. This is why the connector mate system was developed.
-
This unique concept is based upon
adaptor tools
which are configured to mate with a specific connector series and shell
size regardless of keying arrangement. They may be used simply as hand
holding devices for easy tightening, or, for more exact requirements, DMC
offers a wide variety of universal tools which can be used in many
combinations
-
The
circular connector vice is unique in design. It utilizes a set of
six numbered pairs of jaw inserts which accommodate diameters from 3/8" to
2". The V-shaped inserts may be mounted on any of 12 keyed positions to
grip the work piece in the most beneficial orientation. No finish damage
or distortion will occur to the connector or accessories because the jaw
inserts are moulded of durable polyurethane. These are supplied in a
convenient set box along with a vice key and ratchet drive tool.
-
Torque
meters in both static mount and hand held configurations are
offered to further guarantee consistency in the mounting of accessories.
Both meters feature a battery-powered light which can be set by the
operator to any torque value within the 0 to 200 inch pound range. This
visual indication has proven to be a production time saver and a necessity
for tight areas or extended reach positions. Both torque meters utilize a
1/4" square drive. This calibration is certified to Federal Specification
GGG-W-00686C.
-
Strap
wrenches which are commercially available for general purpose duty
usually have shortcomings when applied to the production or maintenance
demands of circular connector work. That was the design consideration of
the exceptional strap wrenches offered by DMC.
Various strap widths are available from 5/15" to 1" and gripping diameters
from 1/2" to 4", the model having 2 1/4" maximum diameter being the most
popular.
-
The
product line is complemented by a variety of accessories which allow the
user mount and use this system in the most comparative positions with all
types of circular connector applications. All are available in MIL-SPEC
type kits or as individual components for all currently manufactured
connector specifications. A detailed brochure is available upon request.
