Positioners adapt the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. Crimp depth is dialled on the 8 step selector knob by merely raising the knob and rotating it to the proper position. The positioner is easily removed and changed.

Periodic gauging is recommended to insure accurate calibration. This is easily accomplished with the M22520/3-01 'GO/NO-GO" gauge (DMC part no. G125). The AFM8 is 6-3/4" in length and weighs approximately 10 oz.

Other than keeping the tool clean and properly stored when not in use, no operator maintenance is required. DMC's complete factory service is available. Complete instructions concerning the use, care and warranty are supplied with each tool. Additional copies are available from the factory.

All DMC tools are designed and built to the highest standards of precision and quality, but some applications call for more. One such case is miniature and sub-miniature contacts which have extremely thin wire barrel dimensions. The answer to this demand is the model MH800 Ultra Precision Crimp Tool which utilizes the same basic components as the Model AFM8 (M22520/2-01) Crimp Tool with tighter gauging tolerances and a special indenter tip configuration that assures a uniform flow of metal during the crimping operation.

The model MH800 accommodates wire sizes 20 thru 32 AWG (the miniature to sub-miniature range). It accommodates the K series or M22520/2-XX positioners and is easily identified by a distinctive orange handle grip. It is the same size and weight as model AFM8. Gauging is accomplished with the G100 "GO/NO-GO" gauge.

Qualified to MIL-C22520/7, the DMC MH860 is a recent addition to the military specification. It was developed to meet the demonstrated need for supporting the majority of electrical systems with one versatile crimp tool frame.

The MH860 accepts the entire middle wire range of 16 through 28 AWG, with positioners which adapt it to virtually all applications consistent with others in the MIL-C-22520 family.

The MH860 gives a Mil-Standard 8 impression crimp with a precision cycle-controlled ratcheting mechanism. It features an 8 step crimp-depth selector knob and is designed for use with the DMC86 series positioners.